MCZ Vivo 85 Hydro Installation Manual Download Page 23

Page: 23 / 76

4-INSTALLATION AND ASSEMBLY

POSITIONING

Before placing the product, assess optimal positioning condition.

INSTALLATION PREMISE

Evaluate the following elements:

The product’s support plane must have the following features:

• withstand the weight of the product and any accessories

• perfectly level

After ascertaining the required conditions for correct installation, proceed with assembling the product:

• perform the various hydraulic and electric connections to the flue, complying with all regulations in force.

It is required to ensure all connections (hydraulic and electric) allow for the product to be extracted.

It is good practice to leave the product without its cladding for a few days to check the tightness of all the hydraulic

connections.

For any type is installation, it is necessary to allow access to the hoses installed on the wall for inspection, because when

it is time to take the product out, it will be necessary to disconnect the hoses from the system.

The frame and the aesthetic door are already assembled with the product.

Summary of Contents for Vivo 85 Hydro













































































Search results

Summary of Contents for Vivo 85 Hydro

Reviews:

Related manuals for Vivo 85 Hydro

Brands by name

Popular brands

MCZ Vivo 85 Hydro, Installation Manual

Search results

Summary of Contents for Vivo 85 Hydro

Reviews:

Related manuals for Vivo 85 Hydro

Brands by name

Popular brands