MCZ Vivo 85 Hydro, Installation Manual

Page: 37 / 76

A1
A2
A3
35
6-HYDRAULIC CONNECTION
Technical Dept. - All rights reserved - Reproduction is prohibited
CONNECTING THE SYSTEM
Make the connections to the corresponding fittings shown in the diagram above. Make sure the pipes are not placed under tension or
undersized.
If installing the product involves another pre-existing system complete with heating equipment (gas boiler, methane boiler, fuel oil boiler,
etc...), it is strongly recommended that you contact a qualified operator who subsequently will be responsible for the compliance of the
system with the applicable laws in force.
WE STRONGLY RECOMMEND WASHING THE ENTIRE SYSTEM BEFORE CONNECTING THE PRODUCT IN ORDER TO GET RID
OF RESIDUES AND DEPOSITS (SEE PARAGRAPH BELOW).
The pressure discharge valve (S) - see image on previous page - must always be connected to a water drain pipe. The
pipe must be adequate to support the water’s high temperature and pressure.
A1 = FLEXIBLE PIPES
A2 = BOILER DISCHARGE TAP
A3 = SAFETY VALVE