MCZ Vivo 85 Hydro Installation Manual Download Page 51

Page: 51 / 76

Esc Set

< Data e Ora >

Esc Off Set

< Crono >

Esc P00 Ok

< Crono >

Esc Utente Ok

< Crono >

Esc Lu P00 Ok

< Personalizza >

21.0°C 21.04

OFF

Mode:AUTO Menu

Temp:22°C Fan:A

6-HYDRAULIC CONNECTION

CRONO (CHRONO)

This operating mode makes it possible to programme switching the product on and off automatically.

Stoves normally have their

CRONO (CHRONO)

mode deactivated.

The fundamental settings of the

CRONO (CHRONO)

mode are:

• Power on/off time selection

• Programme activation day selection

The current date and time setting is essential for correct chrono operation.

ACTIVATING CRONO (CHRONO) AND SETTING A WEEKLY PROGRAMME

Below is an explanation of how to

activate the CRONO (CHRONO) function by choosing a weekly or daily programme:

press the Menu button and scroll through the date and time menu with the relative key until CRONO (CHRONO) appears. Then, press the

SET key accordingly to enter a programme. P00 appears in the centre of the screen between Esc and Ok. by scrolling with the keys below

it is possible to choose from the 10 pre-set weekly programmes on the product control panel.

From the tables provided in the “Pre-set weekly and daily programmes”, choose the programme that most suitably fulfils the heating

requirements of your home and save the programme number on the control panel screen, confirm with OK. If none of the 10 pre-set

programmes fulfil your personal heating needs, it is possible to build a customised weekly programme as needed (see paragraph below).

If the keyboard remains inactive for 10 seconds, the control panel screen automatically exits chrono adjustment

mode and does not confirm the last setting to be entered.

Press OK to confirm CRONO (CHRONO) selection.

CAUTION!

CRONO (CHRONO) function can be activated/deactivated when the product is on or off. If a chrono programme is

activated, the initial screen will switch between product operation status (on/off/ignition...) and the words “CRONO

P01 attivo (CHRONO P01 active)” (example).

Summary of Contents for Vivo 85 Hydro













































































Search results

Summary of Contents for Vivo 85 Hydro

Reviews:

Related manuals for Vivo 85 Hydro

Brands by name

Popular brands

MCZ Vivo 85 Hydro, Installation Manual

Search results

Summary of Contents for Vivo 85 Hydro

Reviews:

Related manuals for Vivo 85 Hydro

Brands by name

Popular brands