MCZ Vivo 85 Hydro, Installation Manual

Page: 21 / 76

19
3-DRAWINGS AND TECHNICAL FEATURES
Technical Dept. - All rights reserved - Reproduction is prohibited
TECHNICAL CHARACTERISTICS VIVO 85 PELLET HYDRO
Nominal output power: 22.3 kW (19178 kcal/h)
Nominal power output (H
2
O): 18.0 kW (15480 kcal/h)
Minimum power output: 4.4 kW (3784 kcal/h)
Minimum power output (H
2
O): 3.0 kW (2580 kcal/h)
Efficiency at Max 92.5%
Efficiency at Min 95.0%
Temperature of exhaust smoke at Max 160°C
Temperature of exhaust smoke at Min 71°C
Particulate/OGC / Nox (13%O
2
) 2 mg/Nm
3
- 0.2 mg/Nm
3
- 132 mg/Nm
3
CO at 13% O
2
at Min and at Max 0.040 – 0.012%
CO
2
at Min and at Max 7.03 - 12.49%
Maximum water pressure 2.5 bar - 250 kPa
Recommended draught at Max*** power 0.10 mbar - 10 Pa***
Minimum draft allowed at Min power 0.02 mbar - 2 Pa
Smoke mass 12.6 g/sec
Hopper capacity 44 litres
Type of pellet fuel Pellet diameter 6-8 mm and size 3÷40 mm
Pellet hourly consumption Min ~ 0.9 kg/h* - Max ~ 4.9 kg/h*
Autonomy At min ~ 28 h* - At max ~ 5 h*
Heatable volume m
3
481/40 – 550/35 – 642/30 **
Combustion air inlet External diameter 50 mm
Smoke outlet External diameter 80 mm
Air inlet 80 cm
2
Rated electrical power (EN 60335-1) 120 W (max 420 W)
Supply voltage and frequency 230 Volt / 50 Hz
Net weight 190 kg
Weight with packaging 200 kg
Distance from combustible material (back/side/under) 100/100/0 mm
Distance from combustible material (ceiling/front) 800/1000 mm
* Data that may vary depending on the type of pellets used
** Volume that can be heated, according to the power requirement per m
3
(respectively 40-35-30 Kcal/h per m
3
)
***Value recommended by the manufacturer (non-binding) for optimal product operation
Tested according to EN 14785 in accordance with European regulation for Construction Products (EU 305/2011).