4
AGZ 026B through 130B
IOMM AGZ-5
Installation
Not
e:
Installation is to be performed by qualified personnel who are familiar
with local codes and regulations.
WARNING
Sharp edges on unit and coil surfaces are a potential hazard to personal safety.
Avoid contact with them.
Handling
Be careful to avoid rough handling of the unit. Do not push or pull the unit from
anything other than the base. Block the pushing vehicle away from the unit to prevent
damage to the sheet metal cabinet and end frame (see Figure 1).
To lift the unit, 2 1/2" (64mm) diameter lifting tabs are provided on the base of the
unit. Arrange spreader bars and cables to prevent damage to the condenser coils or
cabinet (see Figure 2).
Figure 1, Suggested Pushing Arrangement
Figure 2, Suggested Lifting Arrangement
All rigging locations
must be used.
Spreader bars
required
(use caution)
Number of fans may vary
from this diagram. The lifting
method will remain the same.
Spreader bars
required
(use caution)
Blocking is required
across full width
Summary of Contents for AGZ026BS
Page 103: ...IOMM AGZ 5 AGZ 026B through 130B 103...
Page 104: ...104 AGZ 026B through 130B IOMM AGZ 5...
Page 105: ......