MCM Electronics dvr User Manual Download

Page: 96 / 151

4/8/16Ch H.264 Network DVR Series- Ver2.2

Click on the

icon if you access this from the Main Menu in Graphics Mode. If

you have made changes, you will be asked whether or not you would like to save
those changes.

Exit Main Menu

Some configuration has been changed.

Please confirm?

[ Save] [ Discard] [ Cancel]

Otherwise, in the regular Main Menu mode, you are presented with the following
window:

3.11.1 Exit & Save Changes

All changes are saved before exiting from the menu.

Data Saving

Please Wait…

3.11.2 Exit & Discard Changes

All changes are ignored (The changes will not be saved and will take no effect.)
before exiting from the menu. Confirm with “Yes” or go back to the menu by
choosing “No”.

Exit Main Menu

Discard changes and exit now?

[

YES] [

NO]

MAIN MENU

Channel Setup

Record Setup
Detector Setup
Authentication Setup
System Setup
Hardware Setup
Utility/Tools
Exit Main Menu

Exit & Save Changes

Exit & Discard Changes

Summary of Contents for dvr
























































































































































Search results

Summary of Contents for dvr

Reviews:

Related manuals for dvr

Brands by name

Popular brands

MCM Electronics dvr, User Manual

Search results

Summary of Contents for dvr

Reviews:

Related manuals for dvr

Brands by name

Popular brands