MCM Electronics dvr, User Manual

Page: 54 / 151

4/8/16Ch H.264 Network DVR Series- Ver2.2
42
RECORD SETUP
Auto Record ◄ 30Sec ►
Active Performance Gains [ Enable]
Record Schedule
Total Power: 480/480 (Power / Sec)
Auto Settings Adjustment
Channel Recording Setup
Channel Number
Record Resolution [ Middle Res (Half D1) ]
Video Quality [Standard]
Record Frame Rate
[15]
Record Performance Gains [ YES]
To distribute the recording power into four channels by click the total power (as
upper red border).
RECORD SETUP
Total Power: 480/480 (Power/Sec)
Channel Select ◄ ······ ►
Resolution Quality Framerate
◄ Half D1 ► [Standard] [15]
[ Half D1 ] [Standard] [15]
[ Half D1 ] [Standard] [15]
[ Half D1 ] [Standard] [15]
[ Half D1 ] [Standard] [15]
[ Half D1 ] [Standard] [15]
[ Half D1 ] [Standard] [15]
[ Half D1 ] [Standard] [15]
Video Resolution, Quality and Frame Rate Setting for each Channel
Resolution:
Press the button “ ◄ / ► ” to adjust the resolution from CIF, Half D1 and D1 for
individual channel.
Quality:
Press the button “ ◄ / ► ” to adjust the resolution from Lowest, Low, Standard, High
and Highest for individual channel.
Frame rate:
Press the button “ ◄ / ► ” to adjust the frame rate from 0 to 30 for individual channel.
There is equal to not recording when setup the frame rate to 0.
3.5.5 Auto Settings Adjustment
This function can automatically allocate the recording power under the selected
record resolution.