MCM Electronics dvr, User Manual

Page: 66 / 151

4/8/16Ch H.264 Network DVR Series- Ver2.2
54
Buzzer-Short: Slow beeping sound from buzzer on main board.
Buzzer-Long : Fast beeping sound from buzzer on main board.
Alarm-Short : Short sound coming from the alarm.
Alarm-Long : Prolonged sound coming from the alarm.
3.6.4.6 Alarm Time
The Alarm Time is the duration of the beep and may be set to: “Nonstop”(no stop),
5sec, 10sec, 15sec, 20sec, 25sec, 30sec, 35sec, 40sec, 45sec, 50sec, 55sec or
60sec.
3.6.4.7 Trigger Full Screen
Trigger Full Screen is the duration of the of full-screen display when a channel is
triggered. This may be set to a period between 1 to 30 seconds.
OFF : It will not display on full screen when the channel has been triggered. Also, the
trigger area will turn to a red color.
3.6.4.8 Trigger Type
There are two trigger types: Initial Trigger and Continuous Trigger .
Initial Trigger
When the sensor has been triggered, the triggering event will be displayed on full
screen for the duration of the period set in
Trigger Full Screen . During that period,
this channel will ignore any other triggering events.
Continuous Trigger:
When the sensor has been triggered, the triggering event will be displayed on full
screen for the duration of the period set in
Trigger Full Screen . The sensor is,
however, still actively monitoring during that period. Should there be a new triggering
event, this channel will display the more recent event and restart the display period.
3.7 Authentication Setup
Authentication Setup manages the authorization for accounts, passwords, and
permissions.