MCM Electronics dvr User Manual Download

Page: 64 / 151

4/8/16Ch H.264 Network DVR Series- Ver2.2

Disable

: Deactivates sensor-triggered detection even when DVR is in a different

recording mode (i.e. Time Recording Mode)

NOTE

The sensors need to be properly mapped to a channel and set
according to their operation characteristics (i.e. normally open or
normally closed) when using Record Detection Activate in the
Sensor Setup.

3.6.4.2 Sensor Mode

This parameter enables or disables sensor mode detection.

Enable:

Activates sensor mode for Sensor Recording Mode

Disable:

Deactivates sensor mode for Sensor Recording Mode

3.6.4.3 Sensor Device Setup

This feature is to easily map a sensor port to a particular channel without having to
remove any wires.

1% 2010/06/06 15:37:47

Time Recording
Mode Icon

Blinking Sensor Icon
[“Sensor Record Detection
Activate” is enabled and the
sensor has been triggered]

Summary of Contents for dvr
























































































































































Search results

Summary of Contents for dvr

Reviews:

Related manuals for dvr

Brands by name

Popular brands

MCM Electronics dvr, User Manual

Search results

Summary of Contents for dvr

Reviews:

Related manuals for dvr

Brands by name

Popular brands