MCM Electronics dvr, User Manual

Page: 82 / 151

4/8/16Ch H.264 Network DVR Series- Ver2.2
70
IP Type
There are two options for IP type: Static IP address and Dynamic IP address
(DHCP and PPPoE).

Static IP Address: User must manually define a static IP address. Contact the
network administrator for this information.

DHCP: System gets the IP address from the router or DHCP server. Contact
the network administrator for this information.

PPPoE : The Point-to-Point Protocol over Ethernet (PPPoE) is used mainly with
DSL services where individual users connect to the DSL modem over Ethernet
and in plain Metro Ethernet networks.
Please input the PPPoE Account ID and Password provided by the ISP.
(Note: Account ID maximum in 24 characters; Password maximum in 16
characters)

GATEWAY: Define gateway IP address. Contact the network administrator for
this information.

SUBNET MASK: A sub network, or subnet, is a logically visible, distinctly
addressed part of a single Internet Protocol network. Contact the network
administrator for this information.

MAC Address: MAC address is a unique identifier assigned to most network
adapters or network interface cards (NICs) by the manufacturer for
identification. It has been set at dedicated address even reset the DVR.
NOTE
You must plan on the network structure if the MIS or Network
Administrator manages the network. Consult with the MIS or
Network Administrator for the IP address segment and port-
forwarding rule for the DVR network setup.
3.9.3.3 Management / Monitoring Setup
The Management/Monitoring Setup menu addresses the management and
monitoring service for remote DVR control and viewing from the internet (i.e.
Internet Explorer) browser and PC Viewer.
NETWORK SETUP
Network Enable [ Enable]
IP Address Setup
IP Type [DHCP]
IP Address [ 0. 0. 0. 0]
Gateway [ 0. 0. 0. 0]
Subnet Mask [ 0. 0. 0. 0]
MAC Address [00:B2:95:DF:96:B7]
PPPoE Account ID [No Definition]
PPPoE Password [No Definition]
Management/Monitoring Setup
Server Setup