McAfee VirusScan Plus, User Manual, Page: 106 / 205

104 McAfee VirusScan Plus
Event Logging
Firewall allows you to enable or disable event logging and, when
enabled, which event types to log. Event logging allows you to
view recent inbound, outbound events and intrusion events.
Configure event log settings
You can specify and configure the types of Firewall events to log.
By default, event logging is enabled for all events and activities.
1
On the Internet & Network Configuration pane, under
Firewall protection is enabled , click Advanced .
2
On the Firewall pane, click Event Log Settings .
3
If it is not already selected, select Enable Event Logging .
4
Under Enable Event Logging , select or clear the event types
that you want or do not want to log. Event types include the
following:
ƒ
Blocked Programs
ƒ
ICMP Pings
ƒ
Traffic from Banned IP Addresses
ƒ
Events on System Service Ports
ƒ
Events on Unknown Ports
ƒ
Intrusion Detection (IDS) events
5
To prevent logging on specific ports, select Do not log events
on the following port(s) , and then enter single port numbers
separated by commas, or port ranges with dashes. For
example,
137-139, 445, 400-5000
.
6
Click OK .
View recent events
If logging is enabled, you can view recent events. The Recent
Events pane shows the date and description of the event. It
displays activity for programs that have been explicitly blocked
from accessing the Internet.
ƒ
On the Advanced Menu , under the Common Tasks pane,
click Reports & Logs or View Recent Events . Alternatively,
click View Recent Events under the Common Tasks pane
from the Basic Menu.