M-B Multi-Service Vehicle
Page 1.5
Safety
© 2008 M-B Companies Inc.
All Rights Reserved
General Safety
•
This manual should be available during operation.
•
Extra copies of this manual are available for purchase through the
M-B Customer Service Department.
•
To avoid serious injury or death, do not modify equipment. Any
modifications made to equipment can be dangerous and can void
equipment warranty.
•
Never defeat a safety device to make a task easier.
•
Never deface or remove factory-installed safety labels. If a label
ever becomes lost, damaged, or illegible, report this condition to a
supervisor and obtain a replacement label from the Customer
Service department of M-B Companies, Inc.
•
Always wear proper apparel when operating equipment; safety
glasses, face shield or goggles, ear protection, and dust mask. Tie
hair back. Never wear loose clothing or jewelry that could get
caught in moving parts.
•
Never operate equipment with covers or guards removed. Rotating
parts can cause severe injury. Keep hands, feet, hair, jewelry and
clothing away from all moving parts.
•
Understand operation of hydraulic and pneumatic controls.
•
Understand which adjustments are operator and which are
maintenance adjustments.
•
Always shut OFF equipment when left unattended.
•
Never operate or work around equipment if under the influence of
alcohol, drugs or medications.
Pre-Start-up Safety
•
Install any covers or guards which may have been removed for
shipping purposes.
•
Before starting equipment, walk around equipment, making a
visual inspection that all safety devices are properly installed and
secured.
•
Check that all hardware, fasteners, hydraulic fittings, etc. are in
good condition and properly fastened. Replace any fatigued or
damaged items with proper replacements.
•
Personnel who are not required to be in the work area should be
kept away. Never start the equipment unless you are absolutely
certain that everyone in the area is clear of the machine and aware
it is being started.
•
Follow the manufacturer’s recommended start-up procedure.
Summary of Contents for Multi-Service Vehicle
Page 2: ...5 19 10 PN 904 154502 ...
