M-B Multi-Service Vehicle
Page 4.26
Operation
© 2008 M-B Companies Inc.
All Rights Reserved
Figure 15
Open the rear latch. Pull down sharply on the end attached to the roof.
The latch will pull free from the connection leaving the post (Figure 16).
Figure 16
Remove the window and store in a safe place.
To replace the window, position it on top of the opening seal.
Move the latches into position. Secure the front two by snapping the
levers into the hinge point. The rear latch should be positioned so the
open clip is over the post. Then push that end onto the post.
Open the window and inspect the seal. The front edge of the window
must lay flat on the seal (Figure 17).
CAUTION:
The seal must be in proper location or it will leak.
Clip
Open
Summary of Contents for Multi-Service Vehicle
Page 2: ...5 19 10 PN 904 154502 ...