MB Multi-Service Vehicle Operation Manual Download Page 23 | Manualshive

Page: 23 / 91

background image

M-B Multi-Service Vehicle

Page 4.21

Operation

© 2008 M-B Companies Inc.

All Rights Reserved

Introduction

This section of the manual describes the function of the controls
typically provided with the MSV. Because of the unique and complex
nature of this equipment, this document may not be an exact
representation of the controls on your equipment.

Controls which are not part of the standard or optional M-B controls
package, but which are unique to an individual attachment may not be
listed. Separate manuals are created for attachments.

M-B Companies Inc. reserves the right to modify the function or
location of the operator controls. Please call our Customer Service
Department before operating the machinery if you have any questions
regarding the controls on your MSV.

Operator Cab Controls

The operatior cab has several controls that are used to operate the
M-B MSV. This section details the controls that the operator uses to
provide comfort and safety. The joystick and the MDC interface are
described in another section.

Operator Seat

The seat is cushioned by an airbag that absorbs bumps and vibration.
The firmness of the cushion is adjusted using a knob located at the
front of the seat and below the operators legs (Figure 6).

Figure 6

Operation

Opera-

ion

4

Adjust Seat

Air Cushion

«
...
21
22
23
24
25
...
»

Summary of Contents for Multi-Service Vehicle




























































































Reviews:

No comments

Related manuals for Multi-Service Vehicle

Brand: Palazzetti Pages: 112

Brand: EASTERN INSTRUMENTS Pages: 93

Brand: Pari Pages: 2

Brand: H-TEC Education Pages: 16

Brand: H-TEC Education Pages: 12

Brand: Ibiza Pages: 21

Brand: IBC Pages: 8

Brand: Ibanez Pages: 8

Brand: IAI Pages: 5

Brand: ICP DAS USA Pages: 45

Brand: Labelmate Pages: 61

Brand: Labconco Pages: 62

Brand: Kärcher Pages: 148

Brand: ProLights Pages: 28

Brand: Strapack Pages: 16

Brand: Hameg Pages: 60

MHL 108 WASH 150.509

Brand: Beamz Pages: 32

Brand: NTN Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands