MB Multi-Service Vehicle Operation Manual Download Page 10

Page: 10 / 91

M-B Multi-Service Vehicle

Page 1.8

Safety

Maintenance Safety

•

Do not remove guards while operating. After maintenance work, be
sure all guards and other safety devices are installed and in proper
working order.

•

Never clean, lubricate, or adjust equipment while it is moving, has
the potential to move or when engine is running.

•

Always release pressure from pressurized systems before
disassembling.

•

Allow ample time for heated components to cool before working on
or working close to them. Use temperature sticks or other
appropriate devices to test temperatures.

•

ALWAYS maintain unit in safe operation condition.

•

Check the conditions of the unit at the end of each day and repair
any damage or defects.

•

Keep all fasteners properly torqued and in safe operating condition.

•

Before maintainance, adjustments, or service (except where
specifically recommended), shut off engine, and secure from
moving.

Storage

ALWAYS clean and lubricate equipment before extended storage.
Clean and lubricate equpment every 6 months during prolonged
storage.

Summary of Contents for Multi-Service Vehicle



























































































Search results

Summary of Contents for Multi-Service Vehicle

Reviews:

Related manuals for Multi-Service Vehicle

Brands by name

Popular brands

MB Multi-Service Vehicle, Operation Manual

Search results

Summary of Contents for Multi-Service Vehicle

Reviews:

Related manuals for Multi-Service Vehicle

Brands by name

Popular brands