MB Multi-Service Vehicle Operation Manual Download Page 24

Page: 24 / 91

M-B Multi-Service Vehicle

Page 4.22

Operation

When the engine is running the firmness is adjusted by rotating the
knob up for firmer or down for less firm. When the engine is off rotating
the knob down releases air.

Two levers on the side of the seat control forward/back and seat back
position (Figure 7).

Figure 7

Move the front lever to release the seat and move the seat to the new
position. Release the lever to lock.

Lift the rear lever to release the seat back. Reposition the seat back
and release the lever to lock.

The seat also has an adjustable lumbar support. A star wheel behind
the seat on the lower left side is used to adjust the firmness.

Figure 8

The seat belt uses a movable clip to prevent retraction during
operation. Set the tension on the seat belt by sitting in the seat with the

Seat

Seat Back Adjust

Forward/Back

Firmer

Less Firm

Summary of Contents for Multi-Service Vehicle



























































































Search results

Summary of Contents for Multi-Service Vehicle

Reviews:

Related manuals for Multi-Service Vehicle

Brands by name

Popular brands

MB Multi-Service Vehicle, Operation Manual

Search results

Summary of Contents for Multi-Service Vehicle

Reviews:

Related manuals for Multi-Service Vehicle

Brands by name

Popular brands