Mazda CX-30 2020, Owner'S Manual

Page: 334 / 680


Consult an expert repairer (we
recommend an Authorised Mazda
Repairer) for repair, painting, or
replacement of the front/rear
camera, front bumper, liftgate and
door mirrors.

Heed the following cautions to
assure that the 360°View Monitor
operates normally.

Do not modify the vehicle
suspensions or lower/raise the
vehicle body, or both.

Always use tyres of the specified
type and size for the front and rear
wheels. Consult an expert repairer
(we recommend an Authorised
Mazda Repairer) for tyre
replacement.

When the display is cold, images
may leave trails or the screen might
be darker than usual, making it
difficult to check the vehicle
surroundings. Always confirm the
safety at the front and around the
vehicle visually when driving.

The method for parking/stopping
the vehicle using the 360°View
Monitor differs depending on the
road circumstances/conditions and
the vehicle conditions. When and
how much you turn the steering
wheel will differ depending on the
situation, , therefore always check
the vehicle surroundings directly with
your eyes while using the system.
Also, before using the system, always
make sure that the vehicle can be
parked/stopped in the parking/
stopping space.
NOTE

If there are water droplets, snow, or
mud on the camera lens, wipe it off
using a soft cloth. If the camera lens
is especially dirty, wash it off with
mild detergent.

If the camera lens is touched or there
is any dirt on it, it could affect the
screen image. Wipe the lens using a
soft cloth.

If the area where the camera is
installed, such as the front bumper,
liftgate or door mirrors, has been
damaged in a vehicle accident, the
camera (position, installation angle)
may have shifted. Always consult an
expert repairer (we recommend an
Authorised Mazda Repairer) to have
the vehicle inspected.

If the camera is subjected to
excessive changes in temperature
such as by pouring hot water on the
camera during cold weather, the
360°View Monitor may not operate
normally.

If the battery voltage is low, the
screen might be temporarily difficult
to view, however, this does not
indicate a problem.

The 360°View Monitor has
limitations. Objects under the
bumper or near both ends of the
bumper cannot be displayed.

Obstructions above the upper image
range of the camera are not
displayed.

Under the following conditions, the
screen might be difficult to view,
however this does not indicate a
problem.

The temperature near the lens is
high/low.

Rainy conditions, water droplets
on the camera, or high humidity.

Mud or foreign matter near the
camera.
When Driving
i-ACTIVSENSE
4-186
CX-30_8HQ1-EE-19I_Edition2_new 2019-10-17 16:47:52