Mazda CX-30 2020 Owner'S Manual Download Page 533

Page: 533 / 680

After that, perform the following procedure.

Move the signal lever up to right
turn

Move the signal lever down
to left turn

Return the signal lever to off

Move the signal lever up to right
turn

Within 5 seconds

Within 1 second

Within 5 seconds

Within 1 second

Turn on the hazard warning
lights.

Turn off the hazard warning
lights.

Both red and green
Emergency call switch
indicator lights turn on.

Press the Emergency call
switch for one second or
longer and release it.

After the procedure is completed, the test mode is performed in the following order
automatically.
1. Procedure is completed
2. Switch to test mode

If Trouble Arises

Mazda ERA-GLONASS

7-21

CX-30_8HQ1-EE-19I_Edition2_new

2019-10-17 16:47:52

Summary of Contents for CX-30 2020









































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-30 2020

Reviews:

Related manuals for CX-30 2020

Brands by name

Popular brands

Mazda CX-30 2020, Owner'S Manual

Search results

Summary of Contents for CX-30 2020

Reviews:

Related manuals for CX-30 2020

Brands by name

Popular brands