Mazda CX-30 2020 Owner'S Manual Download Page 521

Page: 521 / 680

NOTE



Only make calls manually for conditions requiring urgent treatment such as illness
or serious injury.



When making emergency calls manually, stop the vehicle in a safe location before
making the call.



The call centre will end an emergency call. The user cannot end the emergency
call.



If a call is disconnected or a call cannot be made to the call centre correctly, an
automatic call is made again to the call centre.

1. Make sure that the ignition is switched ON.
2. Long-press the Emergency call switch on the overhead console and then release

your ﬁnger from the switch.

1. Emergency call switch

3. The indicator light (green) on the Emergency call switch ﬂashes slowly (0.5

second intervals) and the call is made to the call centre.

1. Green

4. When the connection is established with the call centre, the indicator light

(green) ﬂashes somewhat quickly (0.3 second intervals) and the transmission of
the vehicle information begins.

5. When the transmission of the vehicle information is completed or about 20

seconds have elapsed since the transmission began, the beep sounds and the
voice call with the call centre starts.

If Trouble Arises

Emergency Call System

7-9

CX-30_8HQ1-EE-19I_Edition2_new

2019-10-17 16:47:52

Summary of Contents for CX-30 2020









































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-30 2020

Reviews:

Related manuals for CX-30 2020

Brands by name

Popular brands

Mazda CX-30 2020, Owner'S Manual

Search results

Summary of Contents for CX-30 2020

Reviews:

Related manuals for CX-30 2020

Brands by name

Popular brands