Mazda CX-30 2020 Owner'S Manual Download Page 126

Page: 126 / 680

the sunroof will stop and move in the
open direction.

NOTE



The jam-safe function may operate
under the following conditions:



A strong impact is detected while
the sunroof is closing
automatically.



The sunroof is closing
automatically during very low
temperatures.



In the event the jam-safe function
activates and the sunroof cannot be
closed automatically, press the tilt/
slide switch and the sunroof will
close.



The jam-safe sunroof function does
not operate until the system has
been reset.

▼

Sunshade

The sunshade can be opened and
closed by hand.

The sunshade opens at the same time
as the sunroof slides open, but it must
be closed by hand.

1. Sunshade

Before Driving

Windows

3-46

CX-30_8HQ1-EE-19I_Edition2_new

2019-10-17 16:47:52

Summary of Contents for CX-30 2020









































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-30 2020

Reviews:

Related manuals for CX-30 2020

Brands by name

Popular brands

Mazda CX-30 2020, Owner'S Manual

Search results

Summary of Contents for CX-30 2020

Reviews:

Related manuals for CX-30 2020

Brands by name

Popular brands