Mazda CX-30 2020 Owner'S Manual Download Page 321

Page: 321 / 680

to the speed of the displayed speed
limit sign.

1. Speed limit sign setting indication

NOTE



The speed limit cannot be set from
the speed limit sign when the speed
limit sign indication is displayed in
gray.

Excessive speed range setting

The range of speed that can exceed the
set speed can be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.



+ 0: The vehicle speed is restricted at
the set speed.



+ 5: If the vehicle speed exceeds the
set speed by 5 km/h (3mph), the
vehicle speed is restricted.



+ 10: If the vehicle speed exceeds
the set speed by 10 km/h (5 mph),
the vehicle speed is restricted.

▼

Temporarily Cancelling the System

The system is temporarily cancelled
(stand-by status) when any of the
following operations is done while the
ISA is displayed.



CANCEL switch is pressed



Accelerator pedal is strongly
depressed



Any door is opened



The driver’s seat belt is unfastened

NOTE



The set speed can be set by pressing
the RES switch up (SET+) or down
(SET-) while the system is in stand-by
status.



The ISA is not cancelled by
depressing the brake pedal.

When Driving

i-ACTIVSENSE

4-173

CX-30_8HQ1-EE-19I_Edition2_new

2019-10-17 16:47:52

Summary of Contents for CX-30 2020









































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-30 2020

Reviews:

Related manuals for CX-30 2020

Brands by name

Popular brands

Mazda CX-30 2020, Owner'S Manual

Search results

Summary of Contents for CX-30 2020

Reviews:

Related manuals for CX-30 2020

Brands by name

Popular brands