Mazda CX-30 2020 Owner'S Manual Download Page 441

Page: 441 / 680

Interior Lights

▼

Interior Lights

NOTE

Do not leave the lights on for long
periods while the engine is turned off.
Otherwise the battery power could be
depleted.

Overhead lights

Front

1. Indicator light

Switch

Overhead Lights

ON/OFF

Press the switch to turn it on.
Press the switch again to turn off
the lights.

Switch

Overhead Lights

DOOR OFF

The door interlock can be switch-
ed ON/OFF.
When the door interlock is OFF,
the indicator light in the switch
turns on.

Door interlock ON (indicator
light in switch is off)



The lights turn on when any of
the doors is opened.



The lights turn on/off in con-
junction with the illuminated
entry system.

Door interlock OFF (indicator
light in switch is on)



The lights do not turn on even
if any of the doors is opened.



The lights do not turn on/off in
conjunction with the illuminat-
ed entry system.

Rear

NOTE

The rear overhead light also turn on
and off when the front overhead light
switch is operated.

Interior Features

Interior Equipment

5-33

CX-30_8HQ1-EE-19I_Edition2_new

2019-10-17 16:47:52

Summary of Contents for CX-30 2020









































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-30 2020

Reviews:

Related manuals for CX-30 2020

Brands by name

Popular brands

Mazda CX-30 2020, Owner'S Manual

Search results

Summary of Contents for CX-30 2020

Reviews:

Related manuals for CX-30 2020

Brands by name

Popular brands