Mazda CX-30 2020, Owner'S Manual

Page: 284 / 680

Distance-between-vehicles
guideline
(at 80 km/h (50 mph) vehicle
speed)
Indication on multi-information
display
Indication on active driving dis-
play
*1
Extremely short (about 25 m (82
ft))
*
1 Displays a pop-up image in the active driving display only when the driver operates the switch.
NOTE

The distance-between-vehicles differs depending on the vehicle speed, and the
slower the vehicle speed, the shorter the distance.

When the ignition is switched to ACC or OFF and then the engine is started again,
the system automatically sets the distance-between-vehicles to the previous
setting.
Changing the Set Vehicle Speed
(To accelerate/decelerate using the
RES switch)
When the RES switch is pressed up
(SET+), the vehicle accelerates and
when the RES switch is pressed down
(SET-), it decelerates.

Press and release immediately: 1
km/h (1 mph)

Press and hold: 10 km/h (5 mph)
(To increase speed using accelerator
pedal)
Depress the accelerator pedal and
press the RES switch up (SET+) or
down (SET-) at the desired speed. If
the switch is not operated, the system
returns to the set speed after you
release your foot from the accelerator
pedal.
NOTE

The warnings and brake control do
not operate while the accelerator
pedal is depressed.

(European models)
When switching to a passing lane
and operating the direction
indicator, the system provides more
acceleration automatically if it
determines that more acceleration is
required. Drive while being careful of
the road ahead because you could
approach the vehicle ahead too
closely.
Cancelling the system
When the following operations are
performed, the MRCC system is
cancelled, and the MRCC set
indication (green) switches to the
MRCC standby indication (white) at
the same time.

The CANCEL switch is pressed.

The brake pedal is depressed.

(Manual transmission)
The shift lever is in the reverse (R)
position.

(Automatic transmission)
When Driving
i-ACTIVSENSE
4-136
CX-30_8HQ1-EE-19I_Edition2_new 2019-10-17 16:47:52