Mazda CX-30 2020 Owner'S Manual Download Page 543

Page: 543 / 680

13.Install the compressor hose to the

tyre valve.

1. Valve
2. Compressor hose

14.Insert the compressor plug into the

interior accessory socket and switch
the ignition to ACC (page 5-35).

1. Compressor
2. Compressor plug

CAUTION



Before pulling out the compressor
plug from the electrical socket,
make sure the compressor power
switch is off.



The compressor turns on and off
with the push-button switch.

15.Turn the compressor switch on and

inﬂate the tyre carefully to the
correct inﬂation pressure.

WARNING

Never operate the compressor
above 300 kPa (3.1 kgf/cm

, 3

bar, 43.5 psi):

Operating the compressor above
300 kPa (3.1 kgf/cm

, 3 bar, 43.5

psi) is dangerous. When the
inﬂation pressure rises above 300
kPa (3.1 kgf/cm

, 3 bar, 43.5 psi),

heated air will be exhausted from
the back of the compressor and you
could be burned.

NOTE



Check the tyre inﬂation pressure
label (driver's door frame) for the
correct tyre inﬂation pressure.



Do not use the compressor for
longer than 10 minutes because
using the compressor for long
periods could damage it.

If Trouble Arises

Flat Tyre

7-31

CX-30_8HQ1-EE-19I_Edition2_new

2019-10-17 16:47:52

Summary of Contents for CX-30 2020









































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-30 2020

Reviews:

Related manuals for CX-30 2020

Brands by name

Popular brands

Mazda CX-30 2020, Owner'S Manual

Search results

Summary of Contents for CX-30 2020

Reviews:

Related manuals for CX-30 2020

Brands by name

Popular brands