MAYBACH COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM, Operator'S Manual

Page: 239 / 319

239
Audio – Rear Cabin
Radio operation
Ten presets each are available for the
FM and AM wavebands.
The following options are available:
Storing manually using number keys
(
page 239).
Storing manually using the Memory
menu (
page 239).
Storing using Autostore
(
page 239).
Storing manually using the number
keys

-

Tune to the station to be stored
(
page 235).
Press a number key between

and

on the remote control and hold it
for more than 2 seconds.
The station is now stored in the re-
spective memory location.
Storing manually using the Memory
menu
Tune to the station to be stored
(
page 235).
In the Radio main menu, select item
Memory
using the selection wheel on
the remote control and press the se-
lection wheel to confirm.
The Memory menu appears.
Use

,

,

or

on the re-
mote control to select a preset.
Press

on the remote control for
more than 2 seconds.
The station will be stored in the re-
spective memory location.
Storing using Autostore
The Autostore function places stations
into the
Autostore memory sorted by re-
ception quality.
The system stores the station transmit-
ting the strongest signal in preset 1.
Switch to the desired waveband
(
page 234).
Select item
Autost.
using the selec-
tion wheel on the remote control and
press the selection wheel to confirm.
The Autostore preset list appears.
Storing stations
i
The Autostore feature stores presets
in a separate memory, not in the reg-
ular presets seen under the
Memory
menu item. Therefore the Autostore
memory is only temporary.