MAYBACH COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM, Operator'S Manual

Page: 234 / 319

234
Audio – Rear Cabin
Radio operation
Call up the Audio/Video main menu
(
page 232).
Select item
Radio
using the selection
wheel on the remote control and
press the selection wheel to confirm.
The Radio main menu appears. The
station last tuned to begins to play.
In this example:
Weather Band
Channel 1 = current station
Select item
FM/AM
using the selection
wheel on the remote control and
press the selection wheel to confirm.
The Radio main menu for the FM or
AM wavebands appears. The station
last tuned to begins to play.
Select item FM/AM again to switch
between FM and AM wavebands.
The waveband is indicated in the cen-
ter of the status bar.
In this example:
FM = FM waveband (VHF)
1 = selected station is stored on
preset 1
Switching to radio mode Switching wavebands
i
The wavebands cover different fre-
quency ranges:
FM waveband:
FM broadcast band
87.7 - 107.9 MHz
tuning increments 0.2 MHz
AM waveband:
AM broadcast band
530 - 1710 kHz
tuning increments 10 kHz
WB waveband:
WB (weather band)
162.400 - 162.550 MHz
tuning increments 0.025 MHz