MAYBACH COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM, Operator'S Manual

Page: 230 / 319

230
System Settings - Rear Cabin
System settings
Deleting individualization
From the individualization menu,
press the

key on the remote con-
trol to select
Delete individualizati-
on
.
Press

on the remote control.
A prompt appears, which asks if you
really want to delete the data.
Press

on the remote control to
select
Yes
if you want to delete the
data.
Press the

key on the remote con-
trol.
The individualization data are delet-
ed.
Activation of the Reset function allows
resetting of COMAND to factory settings.
In addition, it allows deletion of:
SMS: Deleting all SMS messages.
Navigation: Deleting all entries in the
Destination memory and in the Last
destination memory.
Activating reset function
Call up the System menu
(
page 224).
Select item
Reset
using the selection
wheel on the remote control and
press the selection wheel to confirm.
A prompt appears asking if resetting
the system and deleting the data is
really intended.
If you want to reset the system, press
key

on the remote control to se-
lect item
Yes
.
Press key

on the remote control.
A promt appears again asking wheth-
er or not resetting the system and de-
leting the data is really intended.
If you want to reset the system, press
key

on the remote control to se-
lect item
Yes
.
Press key

on the remote control.
This resets the entire system.
i
This function is not available if no in-
dividualization data have been saved.
Reset function
i
If you do not want to reset the system
and delete the data:
Press key

on the remote con-
trol to select item
No
.
Press key

on the remote con-
trol.
The reset screen disappears.