MAYBACH COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM, Operator'S Manual

Page: 178 / 319

178
Voice Control System – Front Cabin
CD player
The Voice Control System gives you the
ability to:
Select a track
Select next track
Repeat a track
Scan tracks
To operate the CD player using the Voice
Control System, the Voice Control System
must be activated (
page 164).
Selecting CD mode:
Briefly pull the operating lever to
position
! .
Speak the following command:
“CD player”
Briefly pull the operating lever to
position
! .
Speak one of the CD player com-
mands.
For a complete list of commands
(
page 184).
“Help CD”
Use the command
“Help CD player”
and the Voice Control System will read
out a complete list of available com-
mands for the CD player.
“CD track 1” to “CD track 39”
Use the commands “CD track 1” to “CD
track 39” to select one of up to 39 title
numbers of a loaded CD.
“Next track”
Use the command “Next track” to select
the next track.
“Repeat track”
Use the command “Repeat track” to play
again the track you are listening to.
“Scan”
Use the command “Scan” to play every
title for ten seconds.
To cancel CD scan:
Briefly push the operating lever to
position
0 .
CD scan is cancelled.
CD player operation CD player commands
i
If the command “Repeat track” is
used within the first 10 seconds of a
given track, the system will start play-
back of the previous track.