MAYBACH COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM, Operator'S Manual

Page: 175 / 319

175
Voice Control System – Front Cabin
Radio
“Seek”
Use the command
“Seek”
for the Voice Control System to activate
the seek function and tune the radio to
the next available station.
Selecting frequency (FM, AM only)
You may, for example, select a frequency
in the FM band (87.9 to
107.9 Megahertz) directly using a verbal
command such as “Ninety-five five”. The
Voice Control System also recognizes the
words “frequency”, “point” and “mega-
hertz”. You may for example use the
command “Frequency ninety-five point
five”.
Sample dialog:
The Voice Control System tunes the radio
to frequency FM 95.5.
“Scan”
Use the command “Scan” (AM and FM
only) to scan the available radio stations.
Each available radio station will be
played for ten seconds.
To cancel “Scan”:
Briefly push the operating lever to
position
0 .
The station scan is cancelled.
“Save station” (Station list)
Use this command to save the set station
(AM and FM only) by name in your per-
sonal station list. After using this com-
mand, the Voice Control System will
prompt you to repeat the name two to
four times before it is saved in the station
list.
Sample dialog:
“Select station” (List saved stations)
Use the command “Select station” (AM
and FM only) to select a saved station
name from your station list.
Sample dialog:
The radio tunes to the corresponding fre-
quency.
s Ninety-five point five
megahertz
i
The Voice Control System may recog-
nize names even if not saved in your
voice. For optimum performance,
however, call up only names you have
saved yourself.
i
You can freely select the station
name, for example “Favorite station”.
s Save station
t Station, please
s Smooth Jazz
t Again
s Smooth Jazz
t The station is set
s
Select station
t
Station, please
s
Smooth Jazz
t
Smooth Jazz