MAYBACH COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM, Operator'S Manual

Page: 116 / 319

116
Navigation – Front Cabin
Navigation main menu
Setting bass / treble
Press the
Bass
or
Treble
soft key in the
Setting menu.
Press

or

.
The bass or treble settings can be ad-
justed.
Press

, or the
Back
soft key and wait
until the display changes.
The new setting is activated (stored).
Setting balance and fader
Press the
Bal/Fad
soft key in the Set-
tings menu.
A cross-hair cursor appears. The verti-
cal line represents the balance set-
ting. The horizontal line represents
the fader setting.
Press

or

.
The cursor moves horizontally, ad-
justing the balance accordingly,
or
Press

or

.
The cursor moves vertically, adjusting
the fader accordingly.
Press

, or the
Back
soft key,
or
Wait until the display changes.
The new setting is activated (stored).
Adjusting the volume
Automatically generated voice an-
nouncements are superimposed over any
other active audio source. The volume
difference is adjustable. This setting
serves to lower the volume of the cur-
rently active audio source while the an-
nouncement is being made.
In the Setting menu ( page 115),
press
Nav.Vol
.
Use this menu to set the volume dif-
ference.
Press the

or

key to select the
desired setting.
Press

.
The new setting is stored and activat-
ed.
i
The cursor can be moved simulta-
neously in vertical and horizontal di-
rection (diagonally) using

and

.
i
The solid circle shows the current
setting.