MAYBACH COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM, Operator'S Manual

Page: 141 / 319

141
Navigation – Front Cabin
During route guidance
The Detour function blocks a route seg-
ment ahead.
The length of this route segment can be
entered. The system then calculates a de-
tour route, if possible.
Show the soft key displays
(
page 139).
The Detour soft key display indicates
whether the Detour function is ac-
tive.
= not active
= active
Detour function is not active:
You can activate the function and set the
length of a route segment to be blocked
(
page 141).
Detour function is already active:
You can change the length of the route
segment to be blocked (
page 141), or
switch off the Detour function by delet-
ing the detour (
page 142).
Activating function and setting length
of route segment to be blocked
The soft key displays are shown
(
page 139).
Press the
Detour
soft key.
The system gives you a full-screen
map and freezes the map and screen
showing the position of the vehicle.
You can now set the distance of the
route segment to be blocked.
Continue to press the soft key
More
or
Less
until the desired distance of the
route segment to be blocked is
reached.
The distance of the route segment
blocked ahead appears in the status
bar. The section of the road that is
blocked appears as a red and white
dotted line on the map.
Press

.
The system calculates a new route
avoiding the blocked road segment.
i
Depending on the distance to the
destination, it may take a few mo-
ments before the route list is com-
pleted.
The list is completed only if route cal-
culation is completed.
Dest.
is dis-
played before the last list entry.
Detour function