MAYBACH COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM Operator'S Manual Download

Page: 295 / 319

295

Front Telephone – Rear Cabin

SMS (Short Message Service)

The sender’s name appears if it is list-
ed in the phone book. If not, only the
phone number appears;

Select item

Sender

using the selection

wheel on the remote control and
press the selection wheel to confirm.

The message text appears.

In the SMS inbox (

page 293),

press





on the remote

control to select the message to be
deleted.

Select item

Delete

using the selection

wheel on the remote control and
press the selection wheel to confirm.

A delete prompt is displayed.

Press



on the remote control to se-

lect the menu item

Yes

Press



on the remote control.

The message is now deleted.

Select item

Back

using the selection

wheel on the remote control and
press the selection wheel to confirm.

This returns you to the Telephone
main menu.

Deleting a message

Exiting from the SMS menu

Summary of Contents for COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM
































































































































































































































































































































Search results

Summary of Contents for COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM

Reviews:

Related manuals for COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM

Brands by name

Popular brands

MAYBACH COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM, Operator'S Manual

Search results

Summary of Contents for COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM

Reviews:

Related manuals for COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM

Brands by name

Popular brands