MAYBACH COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM, Operator'S Manual

Page: 188 / 319

188
Voice Control System – Front Cabin
What to do...
Problem Possible cause/consequence Suggested solution
Voice Control System does not recognize
commands. You have not operated the system from
the driver’s seat. Operate the Voice Control System only
by the driver as the microphone is
geared to the driver side.
You have spoken unclearly, too loudly or
too quietly. Speak the commands in a continuous
manner using a normal tone.
A blower is set to the highest setting,
vents are pointed at microphones or wind
noise is being created through open win-
dows. Avoid loud disturbances.
Voice Control System does not recognize
a phone book entry. The voice entries in the phone book
sound too similar. When you create your phone book en-
tries, select names with the greatest
possible acoustic differences: If for ex-
ample you have the names Smith and
Schmidt, choose for example “Smith
office” or “Schmidt John”.
Speak the command “List phone
book”.
The system reads out the phone book
entry by entry.
Briefly pull operating lever when the
desired entry is being read out.
The entry is selected and the corre-
sponding number is dialed
(
page 171).