Savant SPK-S1WS Series, Quick Reference Manual

Page: 1 / 2

SPK-S1WSx-xx Quick Reference Guide | 009-1886-02 1 of 2 45 Perseverance Way, Hyannis, MA 02601
Copyright © 2021 Savant Systems, Inc. | 210118 Savant.com | 508.683.2500
Minimum Support Requirements
Software
Release
da Vinci 9.2
Regulatory
Safety and
Emissions
FCC Part 15B C Tick UL CE
RoHS Compliant
Box Contents
(1) Smart Audio WiSA Sub 1 (SPK-S1WSx-xx)
(2) 2-Pin Screw Down Connector (028-0884-xx)
(1) Power Cord (064-0480-xx)
(1) Pair of White Gloves
(1) Product Regulatory Statement (009-1950-xx)
Specifications
Input Panel (Bottom)
AC 100-120V -50/60Hz
220-240V
200W
Min Max
Volume
60
LPF Phase
Trigger
In
IR
In LPF
12dB/24dB
Power
Mode
Status
Wisa
Reset LFE In
On
Audio Sense
Trigger
160 Hz 0 180 -50/60Hz
Caution: Risk of Electric
Shock - Do Not Open
For Indoor
Use Only
E475835
AV Equipment
!
0981
!
Assembled in China Attention: Risque
D’Electocution - No Pas Ouvir!
Achtung: Gefahr Eines Elektr
Schlages - Nicht Öffnen!
A B C D E F G H I J
K L
A
AC Power
Input
Main power input.
B
Volume
Control
Adjusts volume.
C
Low Pass
Filter
Adjusts the upper end of frequency
response.
D
Phase Control Used to time-align the output signal from
the WiSA Sub to other speakers.
E
12V Trigger
Input
2-pin screw down connector. Used to
control ON/STANDBY settings based on
12V DC input signal.
F
IR Input
2-pin screw down connector allowing for
IR control.
G
LPF Slope Controls the slope rate upper end
frequency response.
H
Power Mode On
: Device is always powered on.
Audio Sense: Power command sent with
active audio signal.
Trigger: Powers on with 12V Trigger Input.
I
LFE Input RCA used for LFE input.
J
Status LED Off: Resetting, or is powered up and
booting the embedded firmware.
Green Fast Blinking:
Updating.
Green Slow Blinking: Entering or finishing
an update.
Green: Normal operation.
Orange: Critical system error.
Orange Slow Blink:
Standby power mode.
K
Reset button
Hold for 10 seconds to disconnect
speaker from the network and forget any
associated WiSA devices.
Note:
This will place the speaker in
Associate Mode.
L
WiSA LED Off: Forced Analog Mode.
Green Fast Blinking: Ready to pair.
Green Slow Blinking:
Streaming audio.
Green: WiSA connected.
Orange: Audio is muted.
Orange Slow Blinking:
WiSA module reset.
Orange Fast Blinking: Reconnecting.
Savant® Smart Audio WiSA Sub 1 Quick Reference Guide
WiSA
Environmental
Temperature 3 2° to 104° F (0° to 40° C)
Humidity 10% to 90% Relative Humidity (non-condensing)
Dimensions (with Grill)
Height Width Depth
SPK-S1WSx
8.0 in
(20.4 cm)
7.5 in
(19.16 cm)
9.1 in
(23.0 cm)
Shipping
14.0 in
(35.56 cm)
14.0 in
(35.56 cm)
13.0 in
(33.02 cm)
Weight
Shipping Weight 18.3 lb (8.3 kg)
Net Weight 15.2 lb (6.9 kg)
Power
Input Power
100 - 120V AC (50/60Hz)
220 - 240V (50/60HZ)
Standby Power
Consumption
WiSA input: 2.5 W
Analog input: 1.25 W
Operating Parameters
Low Pass Filter 60 - 160 Hz
Low Pass Filter
Slope
12 / 24 dB/octave
Frequency
Range
30hz - 160 hz +/- 0.5 dB
Wattage 200 Watts
Streaming Quality Up to 24 bit / 96kHz High Resolution Audio