Set up Connection
56
© MAYAH Communication GmbH
(b) Via the remote control software:
•
Click on
CONNECT
or press the “C” key (enter phone number direct) or click on
PHONE
BOOK
or press the “P” key (select subscriber from the phone book). One of the
following dialog windows opens, depending on the selected data interface:
Figure 60:
The
CONNECT DIALOG
window with various selected interfaces
•
Select the desired parameter in the dialog window.
•
Click on
OK
.
The device then starts to set up the connection to the desired communication partner.
You can follow this process on the MERK II’s display in the
CONNECTION SETUP
or in
the window of the remote control software:
Figure 61:
The
CONNECTION STATUS
mask
After the connection has been set up successfully, the device switches to the mask that
was displayed beforehand. If you want to monitor the existing connection, select
STATUS
(see the following section “
Execute and Monitor Transmission
”).
