Individual Parameters
42
© MAYAH Communication GmbH
(a) Via the remote control software:
•
Select
SETTINGS
AUDIO
in the remote control software
.
The following dialog window
opens:
Figure 43:
The
AUDIO SETTINGS
dialog window
•
Set the desired level with the mouse under “Input Clipping” or “Output Clipping”.
•
To make the new level effective, click on “OK”.
5.1.12. Set sources for the input channels
Here you can choose the input source for the 4 channels. Also the Directors Channel can
be set to appropireate input.
This setting is only possible via the front panel, and not via the remote software:
(a) Via the front panel:
•
Select the
SETUP
option in the Start mask (see
Figure 4
). The Setup mask appears.
•
Select
Input
and press
. The
Input
mask appears.
Figure 44:
The
Input
mask
•
Select the appropriate item with the
and
keys and press
.
•
Select the desired parameter with the
and
keys and press
.
•
Choose at “Director Channel” the source, which input audio should be heard, but not
broadcasted.
•
To end press the key.
