Table of Contents
Centauri user manual revision level 01 /2007
13
1.4.3.
Mask Display and Key Controls
The mask representation and key controls follow the following rules:
1)
2)
3)
Figure 8:
Mask display
The mask title is top left (in Figure 11
1)
: “Analog Levels”). It is shown inverse. The action
description is found to the right of the mask title. In Figure 11
1)
the request is
SELECT
ITEM
, since no selection has been made. As soon as one of the list items is selected with
the arrow keys and activated by pressing
, its name appears in the mask top right (see
Figure 11
2)
). This list item now reacts to the key input. In order to leave this list item and
save the setting made, one must press
.
After pressing the
key in phone book or communication profile, the
OK
or
CANCEL
dialogs
appear. In this the OK icon is pre-selected and furnished with a thicker outline
(see Figure 11
3)
). Pressing the
key again gives positive confirmation of the whole dialog
in this case.
In all other dialogs the (also altered) setting is immediately taken over from the dialog with
.
If in the case of phone book or communication profile dialogs you leave the dialog without
making any changes, i.e. you want to quit the dialog, then press
and select the Cancel
icon. When you now press
, the dialog is closed without being saved or changed. To
cancel all other dialogs it is sufficient to press .
If an arrow pointing up and/or down
appears in a display, there are then other lines
above or below the lines shown that you can shift up or down using
and
and then
bring onto the display.
