Table of Contents
Centauri user manual revision level 01 /2007
17
1.5.3.
Automatic UDP-Scan
•
With selecting
SETTINGS REMOTE SETTINGS
(automatical)
it is possible to
examine the LAN or the serial interfaces for other Merk IIs. The following dialog
window opens:
Figure 11:
Automatic UDP-Scan
•
Enter the
Number of com ports
for setting the number of serial interfaces that are to
be examined or
•
Select
UDP Scan
‘Yes’ for scanning the LAN for other Merk IIs.
•
Click on ‘OK’ for activating the scan.
The current action is displayed during the scan, e.g. ‘
Try Com Port 1 at baud rate
9600‘.
All found Merk IIs are listed below with information about number of comport, baudrate and
Merk II name/serial number in case of scanning serial interfaces or IP-address and Merk II
name/serial number in case of scanning the LAN.
