English
- 57 -
Panel
Panel type
86” (218m) 16/7 ELED
Resolution
3840x2160(16:9) -
UHD
Visual
angle
Horizontal
89°
Perpendicular
89°
Max. brightness
Typ: 400 cd/m2
H-Frequency
60 Khz
V-Frequency
67,5 Khz
Audio
2 x 8 W Audio Output Power
Network Connection
1 x Ethernet (LAN) for Internet connectivity
1 x Ethernet (LAN) for Internet connectivity (Android)
Input/Output Ports
1 x RS232 port
1 x VGA port
1 x Ethernet port
1 x Ethernet port (Android)
1 x USB 2.0 port
1 x USB 2.0 port (Android)
1 x Micro SD port (Android)
3 x HDMI 2.0 In port (1.4 for FHD panels)
1 x IR port
1 x Headphone
/Line Out
port
1 x HDMI Out port
1 x SPDIF Optical Out port
1 x DiplayPort v1.2 In
1 x DiplayPort v1.2 Out
1 x Audio In port
1 x RJ12 (for sensor) port
1 x RJ12 (service use only) port
OPS (Optional)
Up to 40W
Power
110-240V AC 50-60Hz 3.2A
Weight (kg)
92
Display Dimensions DxLxH (mm)
1975mm x 1146mm x 103mm
Warning
Surges could cause data loss except monitoring
modes.
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful in-
terference in a residential installation. This equipment
generates, uses and can radiate radio frequency ener
-
gy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is en
-
couraged to try to correct the interference by one of
the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment
and receiver.
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV
technician for help.
FCC Caution:
Any changes or modifications not
expressly approved by the party
responsible for compliance could void
the user’s authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
For product available in the USA/Canada market, only
channel 1~11 can be operated. Selection of other
channels is not possible.
IMPORTANT NOTE
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20cm between the radiator &
your body.