Maxell MA-8610BK, User Manual

Page: 37 / 61

English - 36 -
GETPORTALMODE
Gets tv is portal mode
or not.
no parameter
#*tv_portal_status:0
#*Portal status 0 is sent to listening
socket(if open)
or
#*tv_portal_status:1
#*Portal status 1 is sent to listening
socket(if open)
SETFRONTPANEL-
CLOCK
Sets front panel clock
time( values : 10:00 ,
12:30 ,... ).
string-integer n( 10:00,
14:00, ...)
#*Time is set succesfully.
or
#*Given time parameter is wrong!
Time is not set.!(Param : 10:00 ,
12:30 , ...)
GETMODELNO Get model no. no parameter #*Model no: ...
SETMODELNO
Set model no. string-integer n
#*ACK
or
#*NACK
GETSERIALNO
Get serial no. (returns
#*NACK if no serial
number has been set)
no parameter
#*<Serial no>
or
#*NACK
SETSERIALNO Set serial no. string-integer n
#*ACK
or
#*NACK
DEACTIVATENETFLIX
Remove account
informations of Netflix.
no parameter
#*Account informations were
deleted for Netflix
or
#*Remove failed for Netflix
account.
GETTVLIFETIME
Prints panel life time in
minutes.
no parameter #*TV Life Time: n
SETPOWERONDELAY Set poweron delay level
integer n (0<=n<=20, delay
is calculated as 100ms*n)
#*Poweron delay set to ... ms
or
#*NACK
GETPOWERONDELAY Get poweron delay level no parameter #*The power on delay is … ms
SIGNAGERESET
Set all items in the
signage settings menu to
their default values.
no parameter
#*All signage settings set to default
values
SETFTIPIN Set FTI PIN number
integer n (n is a four digit
number)
#*FTI PIN was set to n
or
#*PIN can not be set to n
GETFTIPIN Get FTI PIN number no parameter #*The FTI PIN is n
SETUSERSECLEVEL Set user security level
string - string (new security
level(NORMAL / ADMIN) -
password)
Please request the password
from your supplier.
#*User security level was set to ...
GETPROFILEINFO Get Profile Info no parameter
#*Profile name: mbXXX_draft_
profile
SILENTRESET
Resets the device
without coming up
backlight.
no parameter
#*This command is available only
Active Standby state!
or
#*Reset operation was not
successful
GETCPUTEMPERATURE Gets cpu temperature no parameter #*cpu temperature is ...
GETRAMUSAGEPER-
CENTAGE
Gets ram usage
percentage
no parameter
#*memory usage percentage is ...
or
#*can not get memory usage
percentage