English
- 11 -
First Time Installation
Note:
In order the
First Time Installation
to be completed
successfully the Display should be connected to the internet.
When turned on for the first time, the language
selection screen will be displayed. Select the desired
language and press
OK
.
On the next screen, set your country preference and
press
OK
to continue.
You will be asked to set and confirm a PIN at this point.
For some country options, the PIN cannot be set to
0000
, in this case you need to enter another 4-digit
number combination. You have to enter this PIN if you
are asked to enter a PIN for any menu operation later.
The
More Settings
menu will be displayed next.
Set
ID
,
OSD Orientation
,
Auto Software Update
options
can be configured using this menu.
Model name
,
Serial number
and
Software version
options are
for information only. They will be grayed out and not
selectable. You can save the model information data
of the Display to a connected USB device using the
Save model information
option. You can also copy
database files from a connected USB device to the
Display using the
Clone from USB
option. Refer to the
Settings Menu Content
section for more information
on the options of this menu. After the settings are
completed, highlight
Next
and press
OK
to continue.
Note:
Please ensure Wifi and BT is set to Auto.
On the next screen, the
Network/Internet Settings
menu will be displayed. Please refer to
Connectivity
section to configure a wired connection. If you want
your Display to consume less power in standby mode,
you can disable the
Wake On
option by setting it as
Off
. After the settings are completed
highlight
Next
and
press
OK
button to continue.
The
First Time Installation
is completed. The Display
will be on the Android source.
To repeat this process and reset the Display's settings
to the factory defaults enter the
Settings>Options
menu, highlight
First time installation
and press
OK
. You will be asked to enter the PIN that you have
defined in the First Time Installation. If the correct PIN
is entered a confirmation message will be displayed
asking whether you want to delete all settings and
reset the Display. Select
Yes
and press
OK
to confirm.
Note:
Do not turn off the Display while initializing first time
installation. Note that, some options may not be available
depending on the country selection.
Android Launcher
The Display will be opened on the Android source
when it is turned on for the first time. Press the
Source
button on the remote, move the focus to
ANDROID
and press the
OK
button to switch to Android source
if another source is set as the currently active input
source.
Setting up the internet connection
There is a secondary ethernet socket on the rear
side of the Display for Android source only. Plug an
ethernet cable into this socket in order to establish
a wired LAN connection for Android source. The
connection status will be displayed in the
All apps>-
Settings>Device-Network
menu under the
Ethernet
caption on the home screen of Android as
Connected
or
Not connected
.
You can also connect to a Wireless LAN for Androi̇
d
source by turning on the
Wi-Fi
option under the same
menu. Refer to following
Network
and
Connecting
to Internet
sections for more information on internet
based settings for Android source.
Home Screen
To interact with the user interface on the home screen,
touch, touch and hold or touch and drag your finger
on the screen instead of using the remote control.
The remote control buttons may not function properly.
On the home screen a logo, wallpaper, time and date
widget, a navigation tool bar and a launch bar will be
available.
For information on how to configure the home screen
see the
Settings (Home Screen)
section.
Logo
The logo used on the home screen of the launcher is
configurable. You can change the logo and its position
from the configuration menu of the home screen.
Wallpaper
The wallpaper used on the home screen of the
launcher is also configurable. You can change it from
the configuration menu of the home screen.
Time & Date Widget
In the middle of the home screen time and date
information will be displayed. You can enable or
disable this widget from the configuration menu of
the home screen.
Home Screen Apps
Only
All apps
application will be pre-loaded on the
home screen which is located on the left hand side
of the screen. You can manage the home screen
applications from the hidden
Settings
menu. See the
Settings
(Home Screen)
section for more information
on this settings menu.
All apps:
Touch
All apps
in order to access
many pre-loaded applications such as
App Store
,
Chromium
,
Downloads
,
File Manager
,
Gallery
and
Settings
. See
Settings
section for detailed
information on
Settings
menu contents. If you
experience problems with an unsupported file
