English
- 17 -
Settings Menu Content
Picture Menu Content
Mode
You can change the picture mode to suit your preference or requirements. Picture mode can
be set to one of these options:
Text
,
Game
,
Sports
,
Signage
and
Natural
.
Contrast
Adjusts the light and dark values on the screen.
Brightness
Adjusts the brightness values on the screen.
Sharpness
Sets the sharpness value for the objects displayed on the screen.
Colour
Sets the colour value, adjusting the colours.
Energy Saving
This Display is designed to be environmentally friendly. If you set this option to
Minimum
,
Medium
,
Maximum
or
Auto
the Display will reduce energy consumption by regulating
the backlight level accordingly. If you like to set the backlight level to a fixed value set as
Custom
and adjust the
Backlight
(located under this setting) manually using Left or Right
buttons on the remote. Set as
Off
to turn this setting off.
If pressed Right button while
Auto
option is selected or Left button while
Custom
option
is selected, “
Screen will be off in 15 seconds.
” message will be displayed on the screen.
Select
Proceed
and press
OK
to turn the screen off immediately. If you don’t press any
button, the screen will be off in 15 seconds. Press any button on the remote or on the
Display to turn the screen on again.
When the Display is not in use, please switch off or disconnect the Display from the mains
plug. This will also reduce energy consumption.
Note:
Available options may differ depending on the selected
Mode
.
Backlight
This setting controls the backlight level. The backlight function will be inactive if the
Energy Saving
is set to an option other than
Custom
.
Advanced Settings
Dynamic Contrast
You can change the dynamic contrast ratio to desired value.
Noise Reduction
If the signal is weak and the picture is noisy, use the
Noise Reduction
setting to reduce
the amount of noise.
Colour Temp
Sets the desired colour temperature value.
Cool (1300K)
,
Normal (9300K) and Warm
(8500K)
options are available.
Picture Zoom
Sets the desired image size format.
Picture Shift
This option may be available depending on the
Picture Zoom
setting. Highlight and press
OK
, then use directional buttons to shift the picture upwards or downwards
.
Film Mode
Films are recorded at a different number of frames per second. Turn this feature on when you are
watching films to see the fast motion scenes clearly.
Skin Tone
Skin tone can be changed between -5 and 5.
RGB Gain
Adjust the strength of the red, green and blue colours. You can use this feature for fine
adjustment of white balance in the picture.
HDMI Full Range
While watching from a HDMI source, this feature will be visible. You can use this feature to
enhance blackness in the picture.
Reset
Resets the picture settings to factory default settings (except
Game
mode).
DP Stream Setting (*)
Sets the DisplayPort stream type.
MST
and
SST
options are available.
(*) This menu item appears only when the input source is set to DP.