56
57
MAXDATA SR1202 M1 – Technical User Guide
Troubleshooting and Problem Solving
56
57
MAXDATA SR1202 M1 – Technical User Guide
Troubleshooting and Problem Solving
Figure 48. Drive Carrier Module with Handle Released
NOTE
If the anti-tamper locks have been activated, please refer to section ”Engaging the Anti-tamper
Locks” on page 33.
2. Slide the carrier, gently, all the way into the enclosure until it is stopped by the camming lever
on the right of the carrier (Figure 49).
Figure 49. Installing a Drive Carrier Module (step 2)
3. Cam the carrier home - the camming foot on the base of the carrier will engage into a slot in
the enclosure. Continue to push firmly until the handle fully engages. A click should be heard
as the latch engages and holds the handle closed (Figure 46).
!
CAUTION
Ensure that the carriers are fully engaged in the enclosure, as shown in Figure 50.
