52
53
MAXDATA SR1202 M1 – Technical User Guide
Troubleshooting and Problem Solving
52
53
MAXDATA SR1202 M1 – Technical User Guide
Troubleshooting and Problem Solving
Installing an SR1202 RAID Controller Module
!
IMPORTANT
Host and Expansion Connectors:
Class 1 Laser Product
• If fitted with optical modules, the modules must be a UL (or other North American NRTL)
RECOGNISED COMPONENT, must be approved by TUV (or other European Product safety
test house) and the laser in the module must comply with Laser Class 1, US 21 CFR (J) & EN
60825-1.
EMC Precautions:
If passive copper cables are connected, the cable must not have a connection to a common ground/
earth point.
1. Check for damage, especially to the interface connector - do not install if the pins are bent.
2. With the latches in the open position (see Figure 41), slide the SR1202 RAID Controller Module
into the enclosure until the latches engage automatically (Figure 42).
Figure 41. SR1202 RAID Controller Module Latch Operation
Figure 42. Installing a SR1202 RAID Controller Module (step 2)
