48
49
MAXDATA SR1202 M1 – Technical User Guide
Troubleshooting and Problem Solving
48
49
MAXDATA SR1202 M1 – Technical User Guide
Troubleshooting and Problem Solving
2. Pull the latch outward to cam the module out of the enclosure (Figure 37).
3. Withdraw the module.
Figure 37. Removing a Cooling Module
Installing a Cooling Module
1. Check for damage, especially to the rear connector on the supply.
!
CAUTION
Handle the module carefully and avoid damaging the connector pins. Do not install the module if any
pins appear to be bent.
2. With the latch in the open position (see Figure 36), slide the module into the enclosure until
the latch engages automatically (see Figure 38).
3. Cam the module home by manually closing the latch (Figure 36). A click should be heard as the
module latches engage.
