54
55
MAXDATA SR1202 M1 – Technical User Guide
Troubleshooting and Problem Solving
54
55
MAXDATA SR1202 M1 – Technical User Guide
Troubleshooting and Problem Solving
Drive Carrier Module
!
WARNING
Observe all conventional ESD precautions when handling SR1202 modules and components. Avoid
contact with backplane components and module connectors, etc.
Removing a Drive Carrier Module
!
CAUTION
Drive spin down
Damage can occur to a drive if it is removed while still spinning, we recommend that you perform All
steps of the following procedure to ensure that the drive has stopped prior to removal:
1. Release the carrier handle, by pressing the latch in the handle towards the right (Figure 46).
NOTE
The anti-tamper lock must be off.
Figure 46. Removing a Drive Carrier Module (step 1)
2. Gently withdraw the Drive Carrier module approximately 1 inch (25 mm) and wait 30 seconds.
3. Withdraw the module from the drive bay (Figure 47).
