56
57
MAXDATA SR1202 M1 – Technical User Guide
Troubleshooting and Problem Solving
56
57
MAXDATA SR1202 M1 – Technical User Guide
Troubleshooting and Problem Solving
Figure 47. Removing a Drive Carrier Module (step 3)
Installing a Drive Carrier Module
!
WARNING
All drive bays must be fitted with Drive Carrier modules or Dummy Carrier modules to maintain a
balanced air flow.
Drive Configuration
!
IMPORTANT
Before you install the drive carrier modules in your SR1202 enclosure, please refer to section “Planning
Your Installation” on page 27 for system configuration information.
Installation Procedure
!
IMPORTANT
Ensure that the carrier is orientated so that the drive is uppermost and the handle opens from the
left.
1. Release the carrier handle, by pressing the latch in the handle towards the right (Figure 48) and
insert the carrier into the enclosure.
