52
53
MAXDATA SR1202 M1 – Technical User Guide
Troubleshooting and Problem Solving
52
53
MAXDATA SR1202 M1 – Technical User Guide
Troubleshooting and Problem Solving
3. Cam the module home by manually closing the latches (see Figure 43).
Figure 43. Installing a SR1202 RAID Controller Module (step 3)
4. A click should be heard as the latches engage.
NOTE
The SR1202 RAID Controller Module will take up to 1 minute to re-initialize onto the loop after re-
cabling.
Battery Module
!
WARNING
There is a danger of explosion if the battery is incorrectly replaced.
Dispose of used batteries in accordance with the manufacturer’s instructions and national
regulations.
Removing a Battery Module
1. Operate the release latch and slide the Battery module out of the SR1202 RAID Controller
Module (Figure 44).
