8
Preface
Figure 1. Drive Carrier Module Caution Label
• Do not operate with modules missing. Spin down time 30 seconds.
• Permanently unplug the unit if you think that it has become damaged in any way and before
you move it.
• An SR1202 enclosure can weigh up to 32 kg (70.4 lb). Do not try to lift it by yourself.
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission
limits. The supplier is not responsible for any radio or television interference caused by using other than
recommended cables and connectors or by unauthorized changes or modifications to this equipment.
Unauthorized changes or modifications could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
European Regulations
This equipment complies with European Regulations EN 55022 Class A: Limits and Methods of
Measurement of Radio Disturbance Characteristics of Information Technology Equipments and
EN 50082-1: Generic Immunity.
Safety
All plug-in modules are part of the fire enclosure and must only be removed when a replacement can
be immediately added. The system must not be run without all modules in place.
!
ATTENTION
In order to fully separate the system from current, power cords must be removed from the wall
outlet.
Figure 2. Chassis Warning Label: Weight Hazard
• Do not lift a SR1202 enclosure by the handles on the Power Supply modules, they are not
designed to support the weight of the enclosure.
• In order to comply with applicable safety, emission and thermal requirements no covers should
be removed and all bays must be fitted with plug-in modules.
