11.0
ALPHABETICAL LIST OF SCREEN DEFINITIONS
www.maxcessintl.com
MAGPOWR Spyder-Plus
MI 850A320 1 M
Page 50 of 60
Tuning
One of the top level menu screens. Used to optimize the dynamic
tuning of the system.
Unload sensing roll.
From the
Cal Sensors
menu.
Load cell calibration happens in two steps. In this first step all loading
must be removed from the sensing roll mounted on the load cells so
that the roll weight can be zeroed out.
Use DHCP
From the
Network
menu.
Determines if the Spyder will try to get a dynamic IP address from a
DHCP server. If "NO" is selected then IP Address, Gateway Address
and Subnet Mask must be configured.
Use Load Cells?
From the
Configure
menu.
Select “Yes” to enable reading of load cells when the Spyder is
configured for a Dancer system.
Use Taper?
From the
Taper Setup
menu for Load Cell control or the
Configure
menu for Open Loop Tension control. Select "Yes" to enable taper
tension.